BUILT NEW IN 2016, THIS RING ROLLING MILL IS INSTALLED IN A NORTH AMERICAN PLANT SITE. AFTER INSTALLING THE MILL, THE MANUFACTURING PROGRAM FOR THE COMPANY CHANGED SO THIS MILL WAS ONLY EVER RUN LIGHT AND INTERMITTENTLY AND IS, THEREFORE, IN "LIKE NEW" CONDITION. IT MAY BE INSPECTED ON REQUEST AND IS AVAILABLE FOR IMMEDIATE DELIVERY.

DIA 157.5 "

HEIGHT 39.4 "

BUILDER HBE PRESS

TYPE RADIAL AXIAL (NEW 2016)

RADIAL 275.6 TONS

AXIAL 220.5 TONS

MIN DIA 15.7 "

MIN RING HEIGHT 3.9 "

MAIN ROLL DIA 32.3 "

MAIN ROLL HEIGHT 43.1 "

AXIAL ROLLS ANGLE OF CONE 35º

NUMBER OF MAIN ROLL MOTORS, CURRENT TYPE & POWER OF EACH (1) @ 630KW DC (845HP)

NUMBER OF AXIAL ROLL MOTORS, CURRENT TYPE & POWER OF EACH (2) @ 400KW DC EACH (536HP EA)

TOTAL ELECTRICAL POWER 1,918 HP

OPERATING PRESSURE 4,786 PSI

MACHINE LENGTH 707.7 "

MACHINE WIDTH 165 "

MACHINE HEIGHT ABOVE FLOOR 215.4 "

NOTE:
ADDITIONAL INFO:
MAX RING WEIGHT: 10,000 KGS (22,000 LBS)
ROLLING SPEED: 0.33 - 1.50 MTRS/SEC
MANDREL ROLL DIMS: 2,245MM LENGTH X 170MM DIAMETER
MANDREL HORIZ SLIDING: 800MM
AXIAL ROLL HORIZ SLIDING: 4,010MM
UPPER AXIAL ROLL VERTICAL SLIDING: 1,020MM

HYDRAULIC SYSTEM:
MAX PRESSURE: 330 BAR
MAIN PUMPS: OILGEAR FIXED DISPLACEMENT AXIAL PISTON PUMPS
PILOT PUMP: OILGEAR VARIABLE DISPLACEMENT AXIAL PISTON PUMPS
COOLING & FILTERING PUMP: VANE PUMP
MANIFOLD BLOCKS AND COMPONENTS: PARKER
SERVO VALVES AND CONTROLLER: MOOG
MAIN TANK: 5,000 LITERS
SYSTEM FILTER & SERVO FILTER: HYDAC
HYDRAULIC FLUID: AW46

ELECTRICAL CONTROL SYSTEM:
PLC: SIEMENS S7
HMI: (4) DELL 24” TOUCH SCREENS (P2418HT (210-ALCS)
MODES: FULLY AUTOMATIC
MEASURING SYSTEM: LASER (GLYCOL COOLED)

CONTROL PANELS:
PLC PANEL: 30 AMP FEED
DC DRIVE PANEL: (2) X 1600 AMP, 600 VOLT FEEDS
MAIN CONTROL PANEL LASER PANEL: 1200 AMP, 600 VOLT FEED
LASER PANEL: 20 AMP, 600 VOLT FEED

COOLING WATER REQUIRED:
TEMPERATURE: 30º - 32º C
PRESSURE: 5-6 BAR
FLOW RATE: 1000 LITRES / MINUTE
P.H.: 7.5 - 8.2
COMPRESSED AIR REQUIREMENTS:
PRESSURE: 5-7 BAR
TEMPERATURE: 20º - 25º C
FLOW RATE: 800 LITRES / MIN

NOTES:
EQUIPMENT TO SUPPLY COMPRESSED AIR IS NOT INCLUDED.
EQUIPMENT TO COOL AND PUMP COOLING WATER IS NOT INCLUDED.
EQUIPMENT TO COOL LASER IS INCLUDED.
AVAILABLE FOR IMMEDIATE INSPECTION AND DELIVERY

STILL INSTALLED AND UNDER POWER FOR INSPECTION

EXCEPTIONALLY FINE CONDITION

P.O.R.

157.5” DIA X 39.4” HEIGHT HBE PRESS RADIAL AXIAL RING ROLLING MILL